Services

Light diesel oil (LDO) is a non-automotive diesel fuel used mostly in engines and machinery with low RPMs. Light Diesel Oil is a kind of diesel fuel with a flashpoint of more than 66 degrees C and is commonly used as a basic fuel in some kinds of boilers and furnaces.

Mineral Turpentine Oil (MTO) is a mixture of Aliphatic, Open- Chain or Alicyclic C7 to C12 Hydrocarbon. MTO is also known as white spirit or petroleum spirits. The oil consists of volatile fraction derived from petroleum. The main components of the oil are paraffin, naphthenic and aromatic hydrocarbons in different proportions.

Kerosine is typically pale yellow or colorless and has a not-unpleasant characteristic odour. Kerosine is widely used to power jet engines of aircraft (jet fuel) and some rocket engines and is also commonly used as a cooking and lighting fuel. Kerosine is used as a domestic fuel for heating/lighting and also for the manufacture of insecticides/herbicides/fungicides to control pest, weeds and fungi.

The refineries that have installed coking units generate pet coke. Raw and Calcined petcoke shall be available from refineries and port locations. It has many industrial uses, including the production of batteries, steel, and aluminum. Fuel grade petcoke is typically very high in heating value and commonly used as fuel in coal-fired power plants, electric power plants and cement kilns.

High Speed Diesel (HSD) is manufactured between 200 °C and 400 ° C from fractional distillation of crude oil, resulting in a mixture of carbon chains and consisting of saturated hydrocarbons. HSD is used as a fuel in medium and high speed compression ignition engines (operating above 750 rpm) in commercial vehicles, stationary diesel engines, locomotives and pumps etc.

Furnace Oil, either as a distillate or a residual, is a fraction derived from petroleum distillation. Broadly speaking, fuel oil is any liquid petroleum product that is burned for heat generation in a furnace or boiler or used for power generation in an engine, with the exception of oils with a flash point of about 40 ° C (104 ° F) and oils burned in cotton or wool-wool burners.

C-9 is available for Industrial application from Refinery and Importers, available at Port and oil company’s terminals. The products will serve a broad range of industries and applications like Wash Oils, Oil Field Chemicals, Paints and Coatings, Printing Inks and Reducers, Offset inks, Water Treatment Chemicals, etc.

Industrial machinery literally runs on oil, and good production results depend on proper maintenance of the oil. Industrial Fuel oil is a distillate fuel that is used commonly for burning in furnaces, boilers and lanterns to generate heat.

Bitumen is known for its waterproofing and adhesive properties and is commonly used in the construction industry, notably for roads and highways. Production occurs through distillation, which removes lighter crude oil components like gasoline and diesel, leaving the heavier bitumen behind.

Sulphur is a multivalent non-metal, abundant, tasteless and and odorless. In its native form sulphur is a yellow crystalline solid. In nature it occurs as the pure element or as sulfide and sulfate minerals. Although sulphur is infamous for its smell, frequently compare to rotten eggs, that odor is actually characteristic of hydrogen sulphide (H2S).

Polyethylene (PE) is an organic polymer made by the polymerization of monomer subunits. The chemical formula of polyethylene is (C2H4)n. Polyethylene is a combination of similar polymers of ethylene with different values of n. A typical polyethylene molecule can contain more than 500 ethylene subunits.

Polypropylene is a type of thermoplastic polymer resin with the chemical formula C3H6. It is useful in many packaging applications as a structural plastic or as a fiber-type plastic. It is easy to customize, lightweight and very flexible, and has high melting point and a low level of electrical conductivity.